Product description

Locating repeatability will determine if one primary and one secondary or two primary liners are needed. With two primary liners, repeatability of ±.0005 inches can be maintained if the two holes for receiver bushings are held to a centerline distance of ±.0002 inch tolerance.

Liners Part number #49705 #49706 #49707 #49708 #49701 #49702 #49711 #49712 #49721 #49722 #49731 #49732 #49733 #49734 #49741 #49742 #49743 #49744 #49705 #49706 #49707 #49708 #49701 #49702 #49711 #49712 #49721 #49722 #49731 #49732 #49733 #49734 #49741 #49741 #49743 #49744

Primary Liner	Fixture Plate	Shank Diameter	Liner O.D. +.0000
Part Number	Thickness +-0.005	(mm)	-0.0004
49705	.50	13	0.7518
49706	.75	13	0.7518
49707	.50	16	1.0018
49708	.75	16	1.0018
49701	.75	20	1.3772
49702	1.00	20	1.3772
49711	.75	25	1.3772
49712	1.00	25	1.3772
49721	.75	30	1.7523
49722	1.00	30	1.7523
49731	.75	35	1.7523
49732	1.00	35	1.7523
49733	1.50	35	1.7523
49734	2.00	35	1.7523
49741	.75	50	2.5025
49742	1.00	50	2.5025
49743	1.50	50	2.5025
49744	2.00	50	2.5025

 

Secondary Liner	Fixture Plate	Shank Diameter	Liner O.D. +.0000
Part Number	Thickness +-0.005	(mm)	-0.0004
49805	.50	13	0.7518
49806	.75	13	0.7518
49807	.50	16	1.0018
49808	.75	16	1.0018
49801	.75	20	1.3772
49802	1.00	20	1.3772
49811	.75	25	1.3772
49812	1.00	25	1.3772
49821	.75	30	1.7523
49822	1.00	30	1.7523
49831	.75	35	1.7523
49832	1.00	35	1.7523
49833	1.50	35	1.7523
49834	2.00	35	1.7523
49841	.75	50	2.5025
49842	1.00	50	2.5025
49843	1.50	50	2.5025
49844	2.00	50	2.5025